ALL-RUSSIAN SCIENTIFIC RESEARCH INSTITUTE OF AVIATION MATERIALS


“VIAM” FSUE, RF SRC

tel: +7(499)261-86-77
fax: +7(499)267-86-09
E-mail: admin@viam.ru
Management
History
Testing center
VIAM Branches
Our partners
Contact Information
www.viam.ru
Homepage Site map E-mail
Scientific trends
Products
Books
Training
Aircraft metallic materials
Light and Superlight Alloys on the Base of Al and Mg
High-strength Al alloys
High service-life Al-alloys
Weldable corrosion-resistant high-technological Al alloys
Low-density Al-Li alloys
High-temperature Al alloys
Laminated alumoglassplastics (SIALs)
Casting aluminium alloys
Magnesium alloys
Titanium alloys
Steels and Alloys
Casting Superalloys for GTE Blades
Intermetallic alloys for GTE parts
Alloys for GTE disks
Heat-resistant weldable sheet materials
Abrasive sealing materials for GTE passages
Porous and Fibrous Metallic Materials (PFMM) for Sound-Absorbing Structures (SAS)
Pressure shaping Hard-Deformable Alloys
Vacuum Plasma High Energy Technology (VPTHE method) for the production of coatings and ion surface treatment
Brazing alloys
Non-metallic aircraft materials
Testing center
Material corrosion resistance and anticorrosion protection methods for structures
Aircraft metallic materials >> Light and Superlight Alloys on the Base of Al and Mg >> High service-life Al-alloys

High service-life Al-alloys

1163-T, T7 medium-strength alloy of duralumin type (σb≥420-460 MPa) with the high level of characteristics of cracking resistance (>135 MPa) and fatigue; it is a basic hard-cladded material for fuselage and lower wing skins.

To watch video
Molding of parts of polymer composite materials
High-temperaure automated test complex
Production of painting materials
Protective technological coatings for steels and alloys
Amorphous tape materials
“VIAM” FSUE climatic stations
Prof. S.I. Kishkina laboratory of material strength and reliability
Thermal analysis
Polymer composite materials
Experimental and industrial department for manufacturing phenolic-elastomer foam plastics
Shop for vacuum casting of blades with the single-crystal structure
S.T. Kishkin research and experimental centre
VIAM-2002 vacuum induction melting unit
MAP ion-plasma units
Express laboratory for determination of alloy chemical composition
X-ray flaw detection in VIAM
System for metallophysical analysis of metallic materials
For better viewing the site it is recommended to install Flash Player. 17, Radio street, Moscow, 105005, Russia.
tel: +7(499)261-86-77; fax: +7(499)267-86-09
E-mail: admin@viam.ru
Copyright © VIAM
All rights reserved 2020
Site design: VIAM