tel: +7(499)261-86-77
fax: +7(499)267-86-09
Testing center
VIAM Branches
Our partners
Contact Information
Homepage Site map E-mail
Scientific trends
Aircraft metallic materials
Light and Superlight Alloys on the Base of Al and Mg
Titanium alloys
Steels and Alloys
High-Strength Carbon-Free Maraging Steels
Corrosion-resistant steels
Carbon-free maraging steels
Cemented and Wear-Resistant Steels for Reducer and aggregate parts
Antifriction and Fretting-Resistant Coatings
Manufactured products and services
Casting Superalloys for GTE Blades
Intermetallic alloys for GTE parts
Alloys for GTE disks
Heat-resistant weldable sheet materials
Abrasive sealing materials for GTE passages
Porous and Fibrous Metallic Materials (PFMM) for Sound-Absorbing Structures (SAS)
Pressure shaping Hard-Deformable Alloys
Vacuum Plasma High Energy Technology (VPTHE method) for the production of coatings and ion surface treatment
Brazing alloys
Non-metallic aircraft materials
Testing center
Material corrosion resistance and anticorrosion protection methods for structures
Aircraft metallic materials >> Steels and Alloys >> Antifriction and Fretting-Resistant Coatings

Antifriction and Fretting-Resistant Coatings

VAP-4 coating with the friction coefficient of less than 0.08 and high wear resistance (Jwear=5·10-9). It is workable in air, vacuum, water, fuels and hydrofluids.

VFP-5 coating possesses the high fretting resistance at the micromovements with the loading to 250 MPa.

VAFKP-2 anti-corrosion composite coating is workable at the temperature from -130 to +250°C and the loading to 200 MPa in air, vacuum and fuels with the friction coefficient to 0.08 and wear resistance of Jwear=1·10-10.

To watch video
Molding of parts of polymer composite materials
High-temperaure automated test complex
Production of painting materials
Protective technological coatings for steels and alloys
Amorphous tape materials
“VIAM” FSUE climatic stations
Prof. S.I. Kishkina laboratory of material strength and reliability
Thermal analysis
Polymer composite materials
Experimental and industrial department for manufacturing phenolic-elastomer foam plastics
Shop for vacuum casting of blades with the single-crystal structure
S.T. Kishkin research and experimental centre
VIAM-2002 vacuum induction melting unit
MAP ion-plasma units
Express laboratory for determination of alloy chemical composition
X-ray flaw detection in VIAM
System for metallophysical analysis of metallic materials
For better viewing the site it is recommended to install Flash Player. 17, Radio street, Moscow, 105005, Russia.
tel: +7(499)261-86-77; fax: +7(499)267-86-09
Copyright © VIAM
All rights reserved 2019
Site design: VIAM