tel: +7(499)261-86-77
fax: +7(499)267-86-09
Testing center
VIAM Branches
Our partners
Contact Information
Homepage Site map E-mail
Scientific trends
Aircraft metallic materials
Light and Superlight Alloys on the Base of Al and Mg
Titanium alloys
Steels and Alloys
Casting Superalloys for GTE Blades
Intermetallic alloys for GTE parts
Alloys for GTE disks
Heat-resistant weldable sheet materials
Abrasive sealing materials for GTE passages
Porous and Fibrous Metallic Materials (PFMM) for Sound-Absorbing Structures (SAS)
Pressure shaping Hard-Deformable Alloys
Die forgings of Ni-base superalloys
Die forgings of high-strength titanium (α + β)- and β- alloys
GTE blade die forgings of Fe-Ni superalloys
Die forgings of superplastic MA20-SP magnesium alloy
VIAM proposes
Vacuum Plasma High Energy Technology (VPTHE method) for the production of coatings and ion surface treatment
Brazing alloys
Non-metallic aircraft materials
Testing center
Material corrosion resistance and anticorrosion protection methods for structures
Aircraft metallic materials >> Pressure shaping Hard-Deformable Alloys >> VIAM proposes

VIAM proposes

- production of small-size die-forgings of highly modified Ni and Ti-base alloys with the complete metallurgical quality control;
- delivery of MA20-SP sheets;
- sale of Licences for the developed technical processes;
- determination of optimum thermomechanical pressure-treatment parameters of newly developed and commercial alloys;
- development of technical documentation for the technological processes (production instructions, technical specifications, technical guides a.o.);
- development and mastering of new production technologies of deformed billets under a Customer request with the use of the computer simulation methods;
- scientific and technical documentation at the stage of mastering new materials and technologies.

To watch video
Molding of parts of polymer composite materials
High-temperaure automated test complex
Production of painting materials
Protective technological coatings for steels and alloys
Amorphous tape materials
“VIAM” FSUE climatic stations
Prof. S.I. Kishkina laboratory of material strength and reliability
Thermal analysis
Polymer composite materials
Experimental and industrial department for manufacturing phenolic-elastomer foam plastics
Shop for vacuum casting of blades with the single-crystal structure
S.T. Kishkin research and experimental centre
VIAM-2002 vacuum induction melting unit
MAP ion-plasma units
Express laboratory for determination of alloy chemical composition
X-ray flaw detection in VIAM
System for metallophysical analysis of metallic materials
For better viewing the site it is recommended to install Flash Player. 17, Radio street, Moscow, 105005, Russia.
tel: +7(499)261-86-77; fax: +7(499)267-86-09
Copyright © VIAM
All rights reserved 2020
Site design: VIAM